Skip to main content
Collections Menu

Plate warmer

Plate warmer
Sheet iron, japanning, wrought iron, copper alloy
1790
Plate warmer
Plate warmer
Sheet iron, japanning, wrought iron, copper alloy
1790
Plate warmer Sheet iron, japanning, wrought iron, copper alloy 1790
Status
Not on view
Label Text

This plate-warmer is one of a pair that George Washington purchased from the New York merchants Berry & Rogers in 1790. As its name implies, it was used to heat plates prior to a meal, thus enabling diners to enjoy their food without it quickly going cold. When its open back was placed in front of a fire in the dining room, the central box of tinned sheet iron created an oven-like environment that warmed the plates stacked on the shelves within. Its exterior was originally japanned (varnished) with a sleek black finish.

Read MoreRead Less
Date1790
Retailer (1787 - 1793)
Geography Retailed - United States
DimensionsOverall: 26 1/4 in. x 13 1/2 in. x 9 1/2 in. (66.68 cm x 34.29 cm x 24.13 cm)
Credit LineGift of G. Freeland Peter, Jr., 1956
Object numberW-2180
DescriptionJapanned plate warmer constructed of sheet iron with copper alloy handle on top, a door on the front and open back; the principal box of the plate warmer is constructed from four sheets of sheet iron; two equally spaced shelves are placed inside the box; four strips of sheet iron line the opening on the front, and a hinged door of sheet iron is bolted to the proper left side; a tab handle is inserted through a hole in the door at the center of the proper right sides and the tail pieces on the inside are used to hold the door shut; on the back, two vertical iron rods are held in place by U-shaped pins that fit into pockets soldered underneath the top, shelves, and bottom of the box; two legs of wrought iron with slipper feet are riveted to the base and sides of the box at the back, and two legs of wrought iron with slipper feet are riveted to the base and front of the box at front; a cast brass handle with beading around the edges of the mounts is screwed to the center top of the box.

see also 56-111 Previous MVLA number

Published ReferencesHelen Maggs Fede, Washington Furniture at Mount Vernon (Mount Vernon, Virginia: Mount Vernon Ladies Association, 1966), 51-52.


Mount Vernon's object research is ongoing and information about this object is subject to change. For information on image use and reproductions, click here.
Bureau table
Walnut veneer, walnut, oak, brass
c. 1725
1725-1750
Pounce box
Iron, tin
c. 1776-1783
c. 1776-1783
Iron chest
Iron
1650-1750
1650-1750
Canteen,
1758,
C.1: Leather, wood, iron, linen, copper alloy 
C.2: Iron, lead, tin
1755-1785
Tackle box
1760-1800
Sheet iron, japanning
1760-1800
Packing chest
Pine, iron, rope, paint
c. 1775
Possibly 1775-1800, with later alterations
Watering can
Copper, lead solder, iron
c. 1700-1800
1700-1800
Watering can
Copper, lead solder, iron
c. 1700-1800
1700-1800
Estate Hours

Open today from 9:00 am – 4:00 pm

iconDirections & Parking
buy tickets online & save